Re: [CBQ] Hallmark E-5 #9915B re-powering

["Duncan Cameron" <c.duncan.cameron@gmail.com>]

Thanks!

On Sat, Sep 7, 2019 at 3:02 PM Michael Woodruff <mwoodruff54@gmail.com> wrote:

Nice neat job, John - thanks for posting the pics.

msw

az

On Sat, Sep 7, 2019 at 8:24 AM John Olson <trains28@jimsjunction.com> wrote:

    Several members have asked to see photos of my re-powering the
Hallmark E-5 using an Atlas/Kato motor w/two hole mount and Life-Like
Proto 2000 E-6 trucks. Hopefully the photos will be worth a 1000 words
since there is no exact science here and the 3 units I re-powered were
basically file and fit until everything worked.

   Two important things: You need to remove about 1/8" from the mounts
to lower the motor a bit, and the Proto trucks swivel over the center
axle where the Hallmark truck swiveled between the center and outer
axle- so the bolster pin needs to be moved inward about 1/4". The
Evergreen plastic piece with the bolster pin is just super-glued to the
frame since it really isn't subjected to much physical force and mainly
keeps the trucks from falling off when you pick up the locomotive. I am
sure someone can come up with some improvements, but this worked for me.

   John


--
John Olson- owner

Jim's Junction
811B 16th St. West
Billings, Mt 59102

406-259-5354
<trains28@jimsjunction.com>
See us on FACEBOOK @ Jim's Junction
See us on GOOGLE @ Jim's Junction

_._,_._,_

---

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#58001) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Mute #9915b
Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_