RE: [CBQ] NE-12 Waycar Modeling

["Rupert & Maureen" <gamlenz@ihug.co.nz>]

Scott

They were "just" posts.

Rupert Gamlen
Auckland NZ

 

  _____  

From: CBQ@yahoogroups.com [mailto:CBQ@yahoogroups.com] On Behalf Of Scott
Myers
Sent: Wednesday, 23 April 2014 2:50 p.m.
To: CBQ@yahoogroups.com
Subject: Re: [CBQ] NE-12 Waycar Modeling

 






Rupert,

Interesting, because I thought I remembered it was a Bachman car that was
the basis of such a model, so I am glad to hear I was not dreaming that.
Yes, I would be very interested in any information about this that you could
send.  Was there an article, or posts to our list?

Thanks,
Scott Myers

 

On Tue, Apr 22, 2014 at 9:43 PM, Rupert & Maureen <gamlenz@ihug.co.nz>
wrote:

  

Scott

There have been a number of posts in the past about using a Bachman waycars
as a basis for a NE-12.  I can send you the details off List if that would
help.

Rupert Gamlen
Auckland NZ

 

  _____  

From: CBQ@yahoogroups.com [mailto:CBQ@yahoogroups.com] On Behalf Of Scott
Myers
Sent: Wednesday, 23 April 2014 2:37 p.m.
To: cbq@yahoogroups.com
Subject: [CBQ] NE-12 Waycar Modeling

 





I have been wondering for some time if there were any HO scale models ever
made that can be used for the NE-12 and 12a waycar (with the sloped cupola).
I happened to pick up an old Tyco caboose this weekend at a train show,
thinking I could perhaps cut the cupola off of it and mount it on an old
Athearn or Roundhouse waycar, but then realized the NE-12 was all welded
construction so didn't have all the rivets that are on both of these two
models.  Of course, these can be removed with some effort, but worse, the
number and/or location of the windows on both of these models aren't even
close to those on the NE-12.  

I'd swear that I had seen an article somewhere on modifying some plastic
caboose model to achieve a model of the NE-12 waycar but I can't find that I
have a copy of this.  Does anyone know of such an article, and if so, where
a copy might be obtained?

Lastly, was there ever a brass HO scale model  produced for an NE-12?

Thanks in advance for any suggestions/leads.

Scott Myers