OK guys its time you all converted to "O Scale" That way you can paint it
they way you want and do your own lettering To say nothing of detailing it
the way you want.
sjh
----- Original Message -----
From: Richard Landon <rlandon@g...>
To: <BRHSlist@yahoogroups.com>
Sent: Thursday, May 09, 2002 7:40 PM
Subject: Re: [BRHSlist] Athern F-3's
> Actually the full number and letter suffix is on each unit. If you
look
> at the center of the sides with about 10x magnification you will see it.
the
> Trust Plate is also clearly legible under the same magnification. I am
> currently on a quest to find a photo of a Q F-3 or F-7 in it's as
delivered
> paint that shows this.
>
> Richard Landon
>
> ----- Original Message -----
> From: "Ray Bedard" <tczephyr@h...>
> To: <BRHSlist@yahoogroups.com>
>
> Subject: Re: [BRHSlist] Athern F-3's
>
>
> > Yes, Aeolus3 is correct. However, since Athearn labeled each boxed set
as
> > "F3A/B 135A/B" and "F3A/B 135D/C", one would assume that the proper
letter
> > designator would appear on the model. As it is, there is no difference
> > between either set. So why not just label the set as: "F3A/B #135".
Yes,
> I
> > know what assume means.
> >
> > Ray
> >
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
|