BRHSLIST
[Top] [All Lists]

Re: [BRHSlist] Athern F-3's

To: <BRHSlist@yahoogroups.com>
Subject: Re: [BRHSlist] Athern F-3's
From: "Russell Strodtz" <vlbg@p...>
Date: Thu, 9 May 2002 20:18:28 -0500
References: <F36LI9mK6PYzDabigPa00003f86@h...> <009e01c1f7bb$508dcd60$0af74440@r...>
Richard,

Page 142 of Al Holck's book on Lincoln NE.

Note that this unit does not even have a locomotive class
plate nor does the 217 in the photo right below it.

Russ
----- Original Message ----- 
From: "Richard Landon" <rlandon@g...>
To: <BRHSlist@yahoogroups.com>
Sent: Thursday, 09 May, 2002 19:40
Subject: Re: [BRHSlist] Athern F-3's


> Actually the full number and letter suffix is on each unit. If you look
> at the center of the sides with about 10x magnification you will see it. the
> Trust Plate is also clearly legible under the same magnification. I am
> currently on a quest to find a photo of a Q F-3 or F-7 in it's as delivered
> paint that shows this.
> 
> Richard Landon
> 
> ----- Original Message -----
> From: "Ray Bedard" <tczephyr@h...>
> To: <BRHSlist@yahoogroups.com>
> 
> Subject: Re: [BRHSlist] Athern F-3's
> 
> 
> > Yes, Aeolus3 is correct. However, since Athearn labeled each boxed set as
> > "F3A/B 135A/B" and "F3A/B 135D/C", one would assume that the proper letter
> > designator would appear on the model. As it is, there is no difference
> > between either set. So why not just label the set as: "F3A/B #135". Yes,
> I
> > know what assume means.
> >
> > Ray
> >
> 
> 
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
> 


<Prev in Thread] Current Thread [Next in Thread>