Re: [CBQ] CB&Q Ballast car

["Louis Zadnichek via Groups.Io" <LZadnichek=aol.com@groups.io>]

June 3, 2019

Greg - Excellent!  Now that you've found the ballast car's original number, you can repaint it on the sides when finished restoring.  I have two other images to share with you.  Attached are in-service images of CB&Q ballast hoppers downgraded to beet service Nos. 221574 and 221660, sisters to your car.

Don't worry about having first painted the car Chinese red. That color will be a good undercoat and preservative for when you put the final coat of mineral red on to make the car look authentic. Please share some images of your restored ballast hopper with us when finished.  Best Regards - Louis

Louis Zadnichek II

Fairhope, AL   

In a message dated 6/3/2019 8:05:18 AM Central Standard Time, gregudolph@gmail.com writes:

All,

  Attached is a Dead of Gift for the ballast car and some of our other CB&Q equipment. The car number was originally CB&Q 221674. Hope this helps narrow down the search.

Greg

On Sun, Jun 2, 2019 at 11:29 PM Tom Kline <tkline@airmail.net> wrote:

Gentlemen,

 

Looking through my files I found an image (albeit poor) of the CB&Q car in question at the Texas State Railroad in Rusk, TX that I took in 1984 on a lousy rainy day.  Unfortunately it’s horribly grainy and doesn’t offer much detail to the lettering questions since most of it is gone by this date, but I thought I’d offer it to the group in case it might help someone.  I was hoping I could glean a car number off it but as you can see on the upper car end it has been painted out, probably by the railroad prior to the sale to Southwest Car Parts.   In a color photo I have showing it from a distance the color of the car looks like boxcar red.

 

Using my photo editing platform I was able to zoom in on the remaining lettering and here’s what I found:  Starting at the far (A end) of the car working towards us:  “For Beet Loading Only” stencil, dimensional data stencil (two lines), more dimensional data stencil (two lines), “For Beet Loading Only” stencil, Repack Data BN (and unreadable location code), 8-17-70 second line, and wheel inspection dot.

 

Hopefully Greg can find an official document to fill in all the other questions.

 

For what it’s worth I hope this helps!

Tom Kline

Houston, Texas

 

 

 

 

 

From: CBQ@groups.io [mailto:CBQ@groups.io] On Behalf Of Rupert Gamlen
Sent: Sunday, June 02, 2019 8:15 PM
To: CBQ@groups.io
Subject: Re: [CBQ] CB&Q Ballast car

 

Louis

I suspect that your photo was a company photo, taken at Havelock, of the first of the class. Just a slight discrepancy between the date of the photo and the construction date on the car.

Were the wood sides a wartime economy measure?

Rupert Gamlen
Auckland NZ

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of Louis Zadnichek via Groups.Io
Sent: Monday, 3 June 2019 4:57 a.m.
To: CBQ@groups.io
Subject: Re: [CBQ] CB&Q Ballast car

 

June 2, 2019

 

Greg - I can contribute the attached three-quarter side image of CB&Q 221500 taken in March 1943.

 

What is the original car number for the ballast hopper your group has restored? Best Regards - Louis

 

Louis Zadnichek II

Fairhope, AL

 

_._,_._,_

---

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#57454) | Reply To Group | Reply To Sender | Mute This Topic | New Topic

Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_

CBQ221574NoOtherInformation.jpg
Description: JPEG image

CBQ221660NoOtherInformation.jpg
Description: JPEG image