Re: [CBQ] GP30 modeling tips

["Gordon Smith kc2bw@optonline.net [CBQ]" <CBQ@yahoogroups.com>]

Randall...the whip antenna is only the base. Use the plastic one so you can drill it out and put a fine piece of fine wire or light test fishing line in(more durable) and glue it on. The shrouded horns are for the GE units. And don't forget to remove the small center bell from the DW  #190 horn.

 

Gordon

----- Original Message -----

From: Randall Doman cbq1968@gmail.com [CBQ]

To: CBQ

Sent: Monday, July 07, 2014 11:32 AM

Subject: Re: [CBQ] GP30 modeling tips

Hi Guys,

 I’ve looked at some photos and the DW AH-190 would be correct for GP-30. I was wrong, sorry.

Randy Doman

On Jul 7, 2014, at 10:24 AM, Randall Doman <cbq1968@gmail.com> wrote:

Hi Guys,

 Just wanted to say thanks for all of the info. I was looking at the Details West and Detail Associates for the Antennas. DA has a wipe antenna, DA 101802, that may work. If not I’ll put the Firecracker on in the correct location until I can find the proper part. For the horns I’ll go with the Details West DW AH-190 the two front bells are off but it’s close enough. The other one they have listed is AH-347 Shrouded 3-Chime CB&Q, GN. 

 Even though some operators may never know the difference in the details I’ll feel better knowing that they are as close as I can get them. 

Thank You All,

Randy Doman

LaCrosse RiverRail Group

CB&Q/BN C&I Sub

 

__._,_.___

---

Posted by: Gordon Smith <kc2bw@optonline.net>

---

Visit Your Group

• New Photos 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___