No part number is given but the exploded diagram calls it out as "24
Platform Railing"....
Charlie Vlk
----- Original Message -----
From: "Myers, Scott V." <svmyers@southernco.com>
To: <BRHSlist@yahoogroups.com>
Sent: Friday, November 28, 2003 4:55 PM
Subject: RE: [BRHSlist] Re: Assembly of American Model Builders Waycar Kits
> That's good news that the Walthers ladders and platform railings are
accurate for these waycars. Are these ladders and railings a single
integrated detail part, or several parts? In response to your's and
Charlie Vlk's emails, is there a list of parts and part numbers in with the
Walthers model? If so, what is the part(s) number(s)?
>
> Thanks to both of you for your assistance.
>
> Scott Myers
>
> -----Original Message-----
> From: graywolfs2 [mailto:graywolfs2@hotmail.com]
> Sent: Thu 11/27/2003 11:05 PM
> To: BRHSlist@yahoogroups.com
> Cc:
> Subject: [BRHSlist] Re: Assembly of American Model Builders Waycar Kits
>
>
> Hi Scott,
> I too have a number of the AMB Q waycars.
> I have only started one of them and also purchased the ladder kit
> that you mentioned. I did do the soldering (using a pencil iron) but
> am not too happy with the outcome. I realize that "practice makes
> perfect", but I don't have the inclenation to keep on trying with
> what could be an expensive item to keep purcasing....
> Any how...I also have the Walthers 4 window Q waycars and the end
> rails and ladders look dead on for the waycar, there is a bit of
> moulding flashing that you would need to clean up with an xacto
> knife, but it still would be worth the time...NOW if we can only get
> the hand-rail part from Walthers. I haven't tried contacting them
> about that as yet.
>
>
>
> Greg K.
>
> in frosty white MN.
>
>
>
>
>
>
> --- In BRHSlist@yahoogroups.com, "Myers, Scott V." <svmyers@s...>
> wrote:
> > I have several of these kits and have been very pleased with their
> assembly. However, I am stymied when it comes to the ladders. Along
> with the kits, I bought the Trout Creek Engineering caboose ladders
> kit. These are etched brass parts that require assembly. The
> directions are definitely correct when they suggest that gluing the
> rungs to the siderails using ACC does not work well, and recommend
> soldering. I fear use of my large soldering gun is likely to burn
> through the thin brass, or at best, leave a messy amount of solder at
> each rung. ( I don't have a torch or pencil type soldering iron.)
> Not surprisingly, the siderails also get easily bent. It appears to
> me that I will face a similar assembly problem with the platform
> railing (made from the wire included) when trying to attach the
> vertical supports to the horizontal railing.
> >
> > For those who have assembled these portions of the waycar kit, or
> anyone else for that matter, how have you constructed the ladders and
> platform railings?
> >
> > One thought that occured to me was substituting ladders and
> railings from another source. The ad I have seen of the new Walthers
> CB&Q 4 Window Wood Caboose appears to have the correct combination of
> ladders and platform railings, although its difficult to see much in
> the way of details. Does anyone know if this is true, or have any
> other suggestions?
> >
> > Thanks for the help.
> >
> > Scott Myers
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> click here
<http://rd.yahoo.com/SIG=12cj11dri/M=267637.4116732.5333197.1261774/D=egroup
web/S=1706043004:HM/EXP=1070082336/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116732>
>
<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=855086271>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/8ZCslB/TM
---------------------------------------------------------------------~->
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
|