Glen
I think you need to talk to Ed DeRouin and make it into a Bulletin at least
an article. From what I have found the Q used there own design for the
bridges and I have even found where there were installations of triangle
headed signals like the Rock Island used. The Q also salvaged everything
and recycled the signal materal from east to west generally
sjh
----- Original Message -----
From: <glenehaug@m...>
To: <BRHSlist@yahoogroups.com>
Sent: Tuesday, July 10, 2001 12:56 AM
Subject: [BRHSlist] Re: CB&Q Cantilever Signal Bridges
> --- In BRHSlist@y..., "David Ulibarri" <davidulibarri@g...> wrote:
> > I have enjoyed reading the posts about CB&Q's cantilever signal
> > bridges...Also, how does one model this signal bridge in HO Scale?
>
> Dave, I am actually working on research and some sketches that would
> help someone model the Q signal bridges. That is why I have been
> asking questions from time to time. Although I have found a lot of
> old Q signal bridge drawings, there are some "holes" in the
> information, like Aurora to St. Paul, and across Iowa.
>
> I can tell you that the specific bridge you asked about at Council
> Bluffs is gone. All of the cantilevers at Council Bluffs and Pacific
> Jct. have been removed, but the foundations are still in, as these
> were very large and probably too expensive to take out.
>
> I haven't figured out how to distribute this information to those who
> want to use it. It is probably too much information to include all
> of it with any future article on signaling, but it could be
> distributed hard copy or on CD. And I also need to make it a little
> more complete. Having said that, there are a lot of bridges that I
> have complete information on, and could send it out now if someone
> wants to model a particular bridge.
>
> Glen Haug
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
|