BRHSLIST
[Top] [All Lists]

Re: [CBQ] CB&Q U23C truck inquiry

To: CBQ@groups.io
Subject: Re: [CBQ] CB&Q U23C truck inquiry
From: "Michael Woodruff" <mwoodruff54@gmail.com>
Date: Fri, 8 Jan 2021 16:07:28 -0700
Delivered-to: unknown
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@groups.io
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/simple; d=groups.io; q=dns/txt; s=20140610; t=1610147262; bh=nRhlW7qOanp0/H8zyGqrSt3+dYgj7PA5YyJbesX3piA=; h=Content-Type:Date:From:Reply-To:Subject:To; b=AdTdP8xrodG65Kd7tNwJnRfVxWtu2nEXHxIy1bgKPR2bLYS7PDsBkuUUIGyGsR76B13 9FqTU8jjvKlBKNlQ761/f0ADbY4iY2Yg4d7irTv1ZsQdqOvRd/3uM6bDWm1HeemkcSu60 op3rsWA6sGVBozooXQ1LgEmp3vPvQHfpyGs=
In-reply-to: <MADEUP.1658634D33A7DDF0.6477@groups.io>
List-id: <CBQ.groups.io>
List-unsubscribe: <https://groups.io/g/CBQ/unsub>
Mailing-list: list CBQ@groups.io; contact CBQ+owner@groups.io
References: <CAAZUR-EuTnN2=x63eHhWADM1br+9PAdm5qVO6bP98sAoEViKBg@mail.gmail.com> <MADEUP.1658634D33A7DDF0.6477@groups.io>
Reply-to: CBQ@groups.io
Sender: CBQ@groups.io
Also possibly worthwhile is this discussion.  It concerns truck details for Norfolk & Western C30s and C36s, but if you scroll down far enough, there is a shot of an Adirondack truck side frame with the chain holder or pulley detail added.  At least, that's what it looks like to me.

msw
az

On Fri, Jan 8, 2021 at 3:47 PM popbumper1 <popbumper1@sbcglobal.net> wrote:
Michael:

  Thanks so much for these, the third one is interesting showing TWO distinct chains. These are honest representations, as you said not "in the detail required", but certainly helpful. These are curious setups. Appreciate you taking the time to share!!

Chris



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: Michael Woodruff <mwoodruff54@gmail.com>
Date: 1/8/21 2:42 PM (GMT-08:00)
Subject: Re: [CBQ] CB&Q U23C truck inquiry

Chris:

These pics show the truck and handbrake chain pulley set-up you describe, although perhaps not in the detail required:

msw
az



On Fri, Jan 8, 2021 at 2:32 PM popbumper1 <popbumper1@sbcglobal.net> wrote:
Good afternoon:

Quick introduction - I am a former (1995-2000) and renewed member of the BRHS, and an HO scale modeler who has formerly attended BRHS conventions and was published in Mainline Modeler magazine.

Having once again returned to the hobby, I am in the process of both starting and finishing some projects,  including a CB&Q U23C, for which I am seeking information. 

Perusal of photos of the Q U23C has shown that the Q chose different trucks (Adirondack triple clasp), as opposed to other roads. And, for better or worse, the engineer truck sideframe employed an unusual "dual pulley" handbrake chain tensioning system. Neither this truck, nor the unique pulley appliance exist in HO scale.

What I am hoping to find here is someone who may have knowledge of, or possession of photos showing the U23C truck, as well as the chain/pulley system. I know that detail shots of such things are a rarity; of all the books I own, none contain useful information.

I am working with a gentleman who does 3D printing, hoping to get these pieces made. Can anyone here assist? Any information/guidance would be extremely appreciated. While I CAN create one of these models, having the wrong truck sideframes would render the model incomplete, so I am hoping to resolve this issue! 

Thank you so much!

Chris Munson



Sent from my Verizon, Samsung Galaxy smartphone

_._,_._,_

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#61123) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_
<Prev in Thread] Current Thread [Next in Thread>