Thanks, Bill, that’s very useful to know.
Nelson Moyer
From: CBQ@groups.io [mailto:CBQ@groups.io] On Behalf Of
William Hirt
Sent: Sunday, August 16, 2020 10:01 AM
To: CBQ@groups.io
Subject: Re: [CBQ] Walthers Proto GP7 Phase II Diesels
There is a undocumented horn selection that I got from Walthers on the previous run of the LokSound equipped locos. Setting the horn CV to 15 will give you a dual A200. It definitely has a different sound than just the single A200 selection.
Bill Hirt
On 8/15/2020 4:42 PM, Nelson Moyer wrote:
Two CB&Q Phase II GP7s arrived in the mail today, and for the first time the decoder has steel and bronze bell sound options. I would expect the Q to use bronze bells on GP7s, but I thought I better
check. There are 16 horn options to choose from, and I would guess that the GP7s had Leslie Tyfon A-200 horns, but I’m open to correction. I have a photo of CB&Q 209 with a chime horn that appears to be a Leslie A-125 and A-200 combo on the short hood. Other
photos (CB&Q 216, etc.) show one A-200 on the short hood pointing forward and another A-200 on the left side pointing to the rear. The models have single horns on the short hood forward and the left side pointing to the rear. Were both of these horns A-200s
or something else? The model road numbers are 202 and 226 if that helps.
I haven’t compared the models to Phase II drawings yet, but out of the box they look pretty good. It sure is nice to have a commercial model come with correct Mars lights, headlights, steam generator,
winterization hatches, heater cabinet and vent, and cab window shades. They came with LokSound 5 decoders, and my next activity is to program the long address and see how they run.
Nelson Moyer
_._,_._,_
Groups.io Links:
You receive all messages sent to this group.
View/Reply Online (#60177) |
Reply To Group
| Reply To Sender
|
Mute This Topic
| New Topic
Your Subscription |
Contact Group Owner |
Unsubscribe
[archives@nauer.org]
_._,_._,_
|