|
There is a undocumented horn selection that I got from Walthers
on the previous run of the LokSound equipped locos. Setting the
horn CV to 15 will give you a dual A200. It definitely has a
different sound than just the single A200 selection.
Bill Hirt
On 8/15/2020 4:42 PM, Nelson Moyer
wrote:
Two
CB&Q Phase II GP7s arrived in the mail today, and for
the first time the decoder has steel and bronze bell sound
options. I would expect the Q to use bronze bells on GP7s,
but I thought I better check. There are 16 horn options to
choose from, and I would guess that the GP7s had Leslie
Tyfon A-200 horns, but I’m open to correction. I have a
photo of CB&Q 209 with a chime horn that appears to be a
Leslie A-125 and A-200 combo on the short hood. Other photos
(CB&Q 216, etc.) show one A-200 on the short hood
pointing forward and another A-200 on the left side pointing
to the rear. The models have single horns on the short hood
forward and the left side pointing to the rear. Were both of
these horns A-200s or something else? The model road numbers
are 202 and 226 if that helps.
I
haven’t compared the models to Phase II drawings yet, but
out of the box they look pretty good. It sure is nice to
have a commercial model come with correct Mars lights,
headlights, steam generator, winterization hatches, heater
cabinet and vent, and cab window shades. They came with
LokSound 5 decoders, and my next activity is to program the
long address and see how they run.
Nelson
Moyer
_._,_._,_
_._,_._,_
Groups.io Links:
You receive all messages sent to this group.
View/Reply Online (#60174) |
Reply To Group
| Reply To Sender
|
Mute This Topic
| New Topic
Your Subscription |
Contact Group Owner |
Unsubscribe
[archives@nauer.org]
_._,_._,_
|