Re: [CBQ] Signal gantries at Buda

[Paul Evans <paul@peke.com>]

Rich,

many thanks.  I have looked at the site and they do it in N gauge.

paul


On 09/05/2012 13:20, rgortowski@aol.com wrote:

Paul,

 

If you are looking for the signal bridge, here is the best representation of the signal bridge for the Q:

 

http://www.njinternational.com/hosignal.htm

I scratchbuilt mine before these were available.  I used signals from Oregon Rail Supply, but there are other ones for the Q available from several diifferent manufacturers.  I'm sure someone on the list will recommend a close match.

 

Rich G.

-----Original Message-----
From: paul <paul@peke.com>
To: CBQ <CBQ@yahoogroups.com>
Sent: Wed, May 9, 2012 6:52 am
Subject: [CBQ] Signal gantries at Buda

 

Thank you to all you that have helped me in my attempt to model Buda.

The layout is well on the way to completion. However, I would like some advice on the signal gantries.

Is the 2-Track B&O Signal Bridge from http://www.traincat2.com/
the most appropriate starting point and what sort of signal heads should I be looking for.

Thank you in advance for all your help.

Paul Evans (from the U.K.)

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___