Yes, I used the eraser dry. The lettering is applied with heat to the cars so
with a little rubbing the lettering comes right off.
--- In CBQ@yahoogroups.com, "Myers, Scott V." <svmyers@...> wrote:
>
> You did this dry, without also using Solvaset, for example?
>
> Scott Myers
> ________________________________________
> From: CBQ@yahoogroups.com [CBQ@yahoogroups.com] On Behalf Of Tristan
> [tristan556@...]
> Sent: Friday, March 26, 2010 10:19 PM
> To: CBQ@yahoogroups.com
> Subject: [CBQ] Re: TCZ Dome Cars and BLI TCZ Consist
>
> The lettering comes off the car very easy with a number two pencil eraser, of
> course you will be removing the dull coat leaving only the shiny nickle
> plating .
>
> --- In CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com>, "thommack"
> <thommack@> wrote:
> >
>
> >
> > Of course, the lettering needs to be changed from "California Zephyr" to
> > Burlington. (Except that BLI I know ran unlettered baggage and diners). So
> > while on this topic, how hard is it to get the CZ lettering off the BLI
> > cars? On the Walthers stainless steel cars you could put on a little
> > SolvaSet and wait about three minutes and the lettering just peeled right
> > off with a fingernail. Does anyone have experience getting the BLI CZ
> > lettering off existing cars?
> >
> > I look forward to your replies.
> >
> > Tom Mack
> > Cincinnati, OH
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
CBQ-digest@yahoogroups.com
CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|