BRHSLIST
[Top] [All Lists]

Re: [CBQ] We Need A CB&Q Stock Car NOW!

To: <CBQ@yahoogroups.com>
Subject: Re: [CBQ] We Need A CB&Q Stock Car NOW!
From: "Bob Schaffer" <bobsenginehouse@missvalley.com>
Date: Wed, 29 Mar 2006 10:28:43 -0600
Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=qYR4W70zfL2FYgqZqv5lQWADUeItMUrc8DxT2WgZa59oDvx/HJdWnzjaiov+QYu6Icw2qQGDy6fd17dbkGzdHapCl2F/BAyk6ochxPquvYGcTOw4qf2PPRGX8ZrGxwWN;
List-id: <CBQ.yahoogroups.com>
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <6.2.1.2.0.20060328132029.044ba6a0@mail.insightbb.com> <6.2.3.4.2.20060328134430.0b5202d0@mail.comcast.net>
Reply-to: CBQ@yahoogroups.com
Sender: CBQ@yahoogroups.com
Try Sunshine models in Springfield, Mo
----- Original Message ----- 
From: "Bob Webber" <no17@comcast.net>
To: <CBQ@yahoogroups.com>
Sent: Tuesday, March 28, 2006 1:47 PM
Subject: Re: [CBQ] We Need A CB&Q Stock Car NOW!


> Well.... do something about it.   Get the plans, photos and such, and 
> present them to a suitable manufacturer.  One problem I see is that 
> it seems you are looking for a mass-production company - I don't see 
> that happening.  BUT, if you were to take the information to a resin 
> kit manufacturer and if you did a little homework ahead of time to 
> see if you could find one version that also used parts from another 
> car (such as an underframe from a box car or something else shared) 
> it would be that much  more likely to happen.
> 
> Stock cars are notoriously a b*ith to do because of the openings - 
> butt, not impossible, and some fine ones have come out - I happen to 
> know someone who is looking for a mid-western project of a car sort 
> of like this.  Again, it helps if *you* do the homework.  But, I 
> would not expect a $10 shake-the-box kit.
> 
> 
> At 01:28 PM 3/28/2006, you wrote:
>>When is someone going to give us an (fairly at least) accurate 
>>Burlington, single deck stock car model?
>>
>>The Athearns and, apparently the Accurail's aren't.  It has been 
>>well over a year since someone posted that Intermountain was 
>>*possibly* coming out with one as well as an ATSF.  So far have only 
>>seen the SF.  And it has been at least a dozen year, probably more, 
>>since Walthers did theirs (it wasn't included in their latest run of 
>>a couple years back, btw) though I don't know the accuracy of that model.
>>
>>Point is, this has been bugging the s%&# out of me for several years 
>>now without resolution, so if nothing else, I basically needed to vent.
>>
>>Carry on . . . :-)
> 
> Bob Webber 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
>


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



<Prev in Thread] Current Thread [Next in Thread>