|
I've donated 1/4" to the foot (O Scale) copies of my dad's E-5A and B, Silver King, Silver Queen and Silver Charger drawings to the BRHS archives. These are mylar copies of the original drawings, I believe. The originals would have gone to RMC when the drawings were published. Copies would be available per BRHS archive policies. The most recent copy of that I know of was in Zephyr #72 which I received a short time ago. Regards, Al Kamm III From: "STEVEN HOLDING sholding@sbcglobal.net [CBQ]" <CBQ@yahoogroups.com> To: "CBQ@yahoogroups.com" <CBQ@yahoogroups.com> Sent: Monday, July 11, 2016 7:29 AM Subject: Re: [CBQ] E-5 I always use a scale rule when making copies. Also have to blow them up to O Scale. You are right the 12 ft. truck spacing from center of rear truck to end of car body scales out to 10' 6" They had to print smaller to fit the page. The drawing for Silver Charger in Nov. 64 RMC is printed across the two pages 34-35 and scales just a hair small but very close. Drawings for Silver King and Queen in July 63 are about 3 inch short Steve in SC On Monday, July 11, 2016 8:04 AM, "'Nolen Null' NNull@aol.com [CBQ]" <CBQ@yahoogroups.com> wrote: Yes, and they were printed under-size. Put a scale rule to them and you'll see what I mean. I wouldn't swear to it but I suspect that Hallmark Model used these plans to build their HO scale models. Nolen Null From: CBQ@yahoogroups.com [mailto:CBQ@yahoogroups.com] Sent: Sunday, July 10, 2016 10:49 PM To: yahoogroups Subject: [CBQ] E-5 There are drawings for E-5 In RMC Feb.1964 P. 34 is A unit P 35 is B unit side and overhead for each all done by Al Kamm Jr. Ran across it looking at some stuff to go to the archives Steve in SC __._,_.___ Posted by: Albert Kamm <akamm3@sbcglobal.net> __,_._,___ |