BRHSLIST
[Top] [All Lists]

[CBQ] Re: Looking for Tenshodo SD24 in CB&Q livery

To: CBQ@yahoogroups.com
Subject: [CBQ] Re: Looking for Tenshodo SD24 in CB&Q livery
From: Joe Melhorn <toyman@sbcglobal.net>
Date: Mon, 20 Mar 2006 17:12:01 -0800
Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=U3LQnJdPu9aLlhd543W3Ij427KO2HpiRJHV1uc7+NHitOobYoUP+AbVr/AD02QTQSV/hJfNsUouKKETNJT4ousFIl2aykB1htyVTDYTF8S01YcsnOFiXNVolovwcgtZJ;
In-reply-to: <1142795176.601.17258.m17@yahoogroups.com>
List-id: <CBQ.yahoogroups.com>
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <1142795176.601.17258.m17@yahoogroups.com>
Reply-to: CBQ@yahoogroups.com
Sender: CBQ@yahoogroups.com
FYI- The Tenshodo SD-24's were all Low Nose, which the 'Q' didn't own!
Unless you are just collecting Tenshodo brass.

Hi John,

I was in my LHS last weekend and they had this SD24 in CB&Q livery in 
the brass display case. I saw it and decided to add it to my 
collection. Other than this engine, all of my Q diesels are P2K. I 
wasn't aware that the Q didn't own any 24's. Usually this sort of 
thing happens with the plastic manufacturers. I always thought the 
brass manufacturers were more accurate. So anyhow, I was looking for 
a second one so that I could pair them up for running. I do run my 
brass. I usually re-motor with can motors and add DCC decoders and 
some sound, as funds permit.

Thanks for the info,

Joe Melhorn
Orangevale, CA  95662 (near Sacramento)
mailto:joe@toyman.ws 



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



<Prev in Thread] Current Thread [Next in Thread>