RE: [CBQ] 9901 and 9902 Stainless Finish

["'Douglas Harding' doug.harding@iowacentralrr.org [CBQ]" <CBQ@yahoogroups.com>]

The group accepts attachments. But Brian you “inserts” are not coming through in the emails I received, just a blank square.

 

Doug Harding

www.iowacentralrr.org

 

From: CBQ@yahoogroups.com [mailto:CBQ@yahoogroups.com]
Sent: Tuesday, December 13, 2016 3:51 PM
To: CB&Q Group
Subject: Re: [CBQ] 9901 and 9902 Stainless Finish [1 Attachment]

 

 

[Attachment(s) from BRIAN PAUL EHNI included below]

I just inserted mine into the body of the message. Attaching should work equally well.

 

 

Thanks!
--

Brian Ehni

 

From: CB&Q Group <CBQ@yahoogroups.com> on behalf of CB&Q Group <CBQ@yahoogroups.com>
Reply-To: CB&Q Group <CBQ@yahoogroups.com>
Date: Tuesday, December 13, 2016 at 3:41 PM
To: CB&Q Group <CBQ@yahoogroups.com>
Subject: RE: [CBQ] 9901 and 9902 Stainless Finish

 

All-

I am not sure how to add a photo to the Yahoo Groups page.

Some of the photos I have show a marked contrast between the Belt Rail and Battens (highly polished) and Cab Front Panels (dead flat).   The oft-published photos of the Twins running side by side and in Union Station during the Aurora-Chicago “Twins” publicity run show this very well.

I also have a photo of the Sam Houston Zephyr which shows the contrast with the Battans.

Charlie Vlk

 

From: CBQ@yahoogroups.com [mailto:CBQ@yahoogroups.com]
Sent: Tuesday, December 13, 2016 2:23 PM
To: CB&Q Group <CBQ@yahoogroups.com>
Subject: Re: [CBQ] 9901 and 9902 Stainless Finish [2 Attachments]

 

 

[Attachment(s) from BRIAN PAUL EHNI included below]

Looking at the photos I have of 9901, the panels under the cab windows seem to have the same sheen as the flat sheet metal on the sides. Here’s a portion of an Otto Perry photo of 9901, as the Sam Houston Zephyr.

 

 

Thanks!
--

Brian Ehni

 

From: CB&Q Group <CBQ@yahoogroups.com> on behalf of CB&Q Group <CBQ@yahoogroups.com>
Reply-To: CB&Q Group <CBQ@yahoogroups.com>
Date: Tuesday, December 13, 2016 at 2:04 PM
To: CB&Q Group <CBQ@yahoogroups.com>
Subject: [CBQ] 9901 and 9902 Stainless Finish

 

All-

The thread on the Aluminum twin hopper brought to mind a question I’ve had for a long time and I wonder if anyone has an explanation…

…..the inauguration photos and even later photos suggest that the 9901 and 9902 Twin Zephyr power units had a dull (or at least less-polished) panel under the cab windows than the 9900, 9903 and subsequent shovel nose units.

Has anyone else noticed this and come up with a reason why this was so and did it last the life of the units?

Charlie Vlk

__._,_.___

---

Posted by: "Douglas Harding" <doug.harding@iowacentralrr.org>

---

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___