Re: [CBQ] HO Decals for Clover and Tower Series Pullmans purchased by CB&Q

["John D. Mitchell, Jr." <cbqrr47@yahoo.com>]

One way, that I use for Zephyr style lettering is to use the decal paper that Micromark sells and make my own.  "Broadway" font on Microsoft Word is reasonably close to Zephyr.

--- On Sun, 2/24/13, Bill Hirt <whirt@sbcglobal.net> wrote:

From: Bill Hirt <whirt@sbcglobal.net>
Subject: [CBQ] HO Decals for Clover and Tower Series Pullmans purchased by CB&Q
To: CBQ@yahoogroups.com
Date: Sunday, February 24, 2013, 10:14 AM

 

I received a flyer from NKP Car Co that they will be doing HO car kits
for the Pullman (leased and CB&Q purchased) "Tower" series as well as
the "Clover" series. I have looked at the pictures in Bill Glick's book
as well as other books. There was a discussion thread on these cars
about a year ago, but question that really was not answered was were
decals available for these cars?

As was noted previously, these cars once the Q purchased them (and they
were still under Pullman lease) had PULLMAN in the Zephyr lettering on
the letter board with the name of the car also in Zephyr lettering. Bill
Glick's book shows several different car series with this type
lettering. The Microscale CB&Q heavyweight decal set (which I have) does
not have the proper lettering for these cars. I have an portions of an
old Champ CB&Q Passenger Car decal set and it does not appear to have
the correct lettering either.

So if anyone has previously built and lettered these cars, how did they
do so?

Bill Hirt

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___