Re: [CBQ] Speeder Shed.

[Sam Cook <trains@sjcook.com>]

I would be glad to assist if you want to come measure ours.
(As long as we get a set of the drawings!)
It is not in very good condition, but could be restored.

http://sullivanhistory.org/depot/platform/toolshed/index.htm

Sam Cook, Milan, MO
===================

dr strangelove wrote:
> HI! I will be trying to build a speeder shed in Z scale, and it will be a 
> kit-bashed project using one that is already produced. I have seen a couple 
> of pictures of the
> ones used on the Q and I see it is rectangular shape with the doors off to 
> one side. One picture  I have seen, shows the door on the left and another a 
> door on the
> right. I know sometimes pictures from slides and whatnot get reversed. Were 
> they all standard with the doors all on the one side or the other as per a 
> plan or would it
> depend on where it was located, track side, ect?? I also take it they were 
> the standard Q red paint-scheme? Thanks
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/CBQ/join
    (Yahoo! ID required)

<*> To change settings via email:
    CBQ-digest@yahoogroups.com 
    CBQ-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/