Re: [CBQ] Re: SM-19 Stock Car

[Kenneth Martin <kmartin537@surewest.net>]

Rich,

I used a coarse X-ACTO saw blade to cut the slots between the boards  
then used a chisel point X-ACTO blade to carefully carve off the  
panels carving the Z brace as I removed the panels. You also have to  
carve away the ladder supoorts on the left side leaving the grabirons  
unless you want to replace them with wire. It was a lot of tedious  
work. I then filled in the slots on the doors and add Q panels with  
plastic.

Ken Martin


On Mar 21, 2011, at 9:45 AM, rgortowski@aol.com wrote:

>
> Ken,
>
> Good to hear it can be done and it looks good.  How did you cut off  
> the cast on panels?
>
> Rich



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/CBQ/join
    (Yahoo! ID required)

<*> To change settings via email:
    CBQ-digest@yahoogroups.com 
    CBQ-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/