BRHSLIST
[Top] [All Lists]

Re: [CBQ] Decaling Shorham KCZ

To: CBQ@yahoogroups.com
Subject: Re: [CBQ] Decaling Shorham KCZ
From: m10000_little_zip <m10000_little_zip@yahoo.com>
Date: Tue, 26 Jan 2010 04:55:09 -0800 (PST)
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1264510516; bh=wrHzBdyV8DkFxlq24XbDHfirNznmqoukBOL74UHY/rk=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:Message-ID:X-YMail-OSG:X-Received:X-Mailer:References:To:In-Reply-To:X-Originating-IP:X-eGroups-Msg-Info:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=GFMYlo1uwhyc2U9kifz10EFfhpwhTpeXDBOAtiBIwE8Jm/mX5QntNfW2G+xZkiDOej6RDFsdXBrb1DXcWMm6A7r0xdDsbZc1vnFrbqZYXJi/bElM5sJhm7KKkd+IvOMw
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=YBVwGrFXs89WiT/HKsnNyNQ2jvQy8SIDx39vedG1i3LbV13o1B9PvlxZW+/xUeVMdczduHnXNFzcs18w4C7gbJ0OtqTvnd1RRZZ2RSlR87fgZtvlGXtu7WUEjpEALcru;
In-reply-to: <841FE08846F345C4B30F2EEC7CB94635@DEEPTHOUGHT>
List-id: <CBQ.yahoogroups.com>
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <hjl1kk+hqm2@eGroups.com> <841FE08846F345C4B30F2EEC7CB94635@DEEPTHOUGHT>
Reply-to: CBQ@yahoogroups.com
Sender: CBQ@yahoogroups.com
Just to confirm, you're talking about floor polish.  Over the counter, buy it 
at Kroger (or your local grocery chain), run of the mill floor polish.

This stuff?

http://www.floorcareproducts.com/floor-finish/index.asp

Do you spray it on like any other paint or gloss?  Do you need to cut it?  Any 
other advice?

Thanks, Bryan

________________________________
From: Rob & Bev Manley robev1630@sbcglobal.net

I have been using Future for almost 20 years. I overcoated my Oriental Twin 
Cities Zephyr with it and it has held up to a lot of handling. About 18 years. 
At the time I think I used Microscale Semi-gloss finish for the final finish. 
All my current work gets a gloss finish of Future for the decals and is 
followed up with Pollyscale Flat finish. I haven't had any cracking or 
discolorment issues. 
All the other modeler gloss coats seem to yellow the finishes. This is 
especially annoying on a set of FTs or F-units.


----- Original Message ----- 
From: Murch 

 I've heard acrylic floor finish actually works better than the comercial gloss 
- comments?


      


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/CBQ/join
    (Yahoo! ID required)

<*> To change settings via email:
    CBQ-digest@yahoogroups.com 
    CBQ-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


<Prev in Thread] Current Thread [Next in Thread>