That's an interesting find. How did you remove the paint without dulling or
otherwise damaging the simulated stainless steel plating?
________________________________________
From: CBQ@yahoogroups.com [CBQ@yahoogroups.com] On Behalf Of arnold299@aol.com
[arnold299@aol.com]
Sent: Sunday, November 29, 2009 12:37 PM
To: CBQ@yahoogroups.com
Subject: Re: [CBQ] BLI Plated E Units
The paint on the top panels can be removed on the CB&Q E-7, and you will find
that the stainless is underneath.
Took a chance and was pleased to find that out. At least the stainless is
correct now on my units.
Scott
-----Original Message-----
From: Myers, Scott V. <svmyers@southernco.com<mailto:svmyers%40southernco.com>>
To: CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com>
<CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com>>
Sent: Sat, Nov 28, 2009 7:40 am
Subject: RE: [CBQ] BLI Plated E Units
Gordon,
Thanks for the information. That's exactly the type of feedback I was looking
for. Disappointing to hear of the errors in the painted versus plated panels
and the radiators. Such obvious errors seem hard to believe. Guess I'll wait
for the Walthers P2K version in February.
Scott Myers
________________________________________
From: CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com>
[CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com>] On Behalf Of Gordon Smith
[kc2bw@optonline.net<mailto:kc2bw%40optonline.net>]
Sent: Friday, November 27, 2009 6:40 PM
To: CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com>
Subject: Re: [CBQ] BLI Plated E Units
Scott...I have 4 of the new Blueline E7s. First thing is that they only come
as DC units with sound. No dual mode DCC decoders as the earlier Es did. As
far as I am concerned these units are a big dissapointment. The sound is no
more like an EMD 567 than the earlier units. The Paragon F3s have the best
prime mover sound. Back to the Blueline E7s...the plating is good, but here
is the big mistake. They PAINTED the top panels below the roof silver. They
admit they knew this but ran them anyway. The second big mess up is the
rooftop radiators. They are covered with CHICKEN WIRE. I cannot believe they
did this after doind previous runs with the proper radiators. And as usual
the wrong pilot casting was used again. I don't know how many times I called
them and told them on previuus runs of all the E units this. At least they
got the wright one on the F3s. All in all, a BIG dissapointment, And I
posted a message to that opinion on BLI's H O forum.
Gordon Smith
----- Original Message -----
From: "Myers, Scott V."
<svmyers@southernco.com<mailto:svmyers%40southernco.com><mailto:svmyers%40southernco.com>>
To:
<CBQ@yahoogroups.com<mailto:CBQ%40yahoogroups.com><mailto:CBQ%40yahoogroups.com>>
Sent: Friday, November 27, 2009 9:42 AM
Subject: [CBQ] BLI Plated E Units
> Does anyone on the list have (or is familiar with) the CB&Q BLI E-7's with
> SS panels? As most if not all know, Walthers P2K line is producing these
> soon in HO, yet the BLI version is not only slightly less expensive but
> has sound installed even in the DC version. I have two P2K E units and am
> happy with them, but it appears to me that the BLI E-7 with the SS panels
> and sound may be a better option, especially since it is available now
> rather than later. For those of you who have one or have at least seen
> one, do the SS panels look realistic on the BLI unit?
>
> Thanks in advance for the feedback.
>
> Scott Myers
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
------------------------------------
Yahoo! Groups Links
=
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
CBQ-digest@yahoogroups.com
CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|