BRHSLIST
[Top] [All Lists]

Re: [CBQ] Covered Gons

To: <CBQ@yahoogroups.com>
Subject: Re: [CBQ] Covered Gons
From: "Rupert and Maureen" <gamlenz@ihug.co.nz>
Date: Mon, 15 Nov 2004 19:51:45 +1300
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <BAY101-F219EHaz8kI000035a93@hotmail.com>
Reply-to: CBQ@yahoogroups.com
Rick

What about a GM-6 #83300-83399? (I don't have a photo of them to compare)
Looking at the photo suggests that the straight sill car is taller than the
other, and the GM-6's were 5' 4" inside height compared with GM-4's at 4'
6".  Alternatively, a GMS-1 197400-197409 with 6' 3" inside height.  Does
anyone have any photos for comparison?

Rupert


----- Original Message ----- 
From: "Rick Keil" <rkeil6721@hotmail.com>
To: <CBQ@yahoogroups.com>
Cc: <kkassay@hwlochner.com>
Sent: Monday, November 15, 2004 10:01 AM
Subject: Re: [CBQ] Covered Gons


>
> Rupert, looking at the model by Modelers Choice, it is a straight sill
> gondola so I think that rules out the GM-4 series.  The GM-10 isn't a
match
> either.  Looking in Spoor's CB&Q Volume 3, page 21 shows the car I think
> Kevin is talking about.  It is covered and has a straight side sill,
> unfortunately there is no way to see the number.
>
> Rick Keil
> Ft Campbell, KY
>
>




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/8ZCslB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




<Prev in Thread] Current Thread [Next in Thread>