BRHSLIST
[Top] [All Lists]

Re: [CBQ] Proper Terminology

To: CBQ <CBQ@yahoogroups.com>
Subject: Re: [CBQ] Proper Terminology
From: John Manion <railbass@comcast.net>
Date: Mon, 13 Jan 2014 20:05:37 -0700
Delivered-to: unknown
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=echoe; t=1389668738; bh=QYtxTCLfCcvrBd+8oPT1H41HDpyeCoIJokOm7mE5u48=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:In-Reply-To:References:X-Google-Sender-Auth:Message-ID:To:X-Originating-IP:X-eGroups-Msg-Info:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type; b=qPoMwODY8B7LsArBek98TR93RmdEY6oYLX3IZMVFJJReK0hxF2EqkcYzQeFE1U3P1ODY7KdSFzE5+AKHUHs/02dOYSZ9ZB0Vbjr/7R0ZSmyCdU+/uzECk13uHNws27JN6+R/F82xmYkf1chAgifk0B8svwOu9K2v5tljf/ljhc8=
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=echoe; d=yahoogroups.com; b=nCN1KY67cfBep/jFr4KHWF2QnkPkfJhQ+JbG2wppyARZruhENYXYuBZDjMm+tXIZl4i3vGMC+jOulYHsi+1cLVeNX6ymQ/ROpmUY9JFIdQP8jmZujSU7Wv/XiwDp6KWjfOBp9jCXXW/ldkquHxfsTeFnoeXqDEMYUsCy66iQZuc=;
In-reply-to: <005c01cf10a2$6d7c6910$48753b30$@net>
List-id: <CBQ.yahoogroups.com>
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <1389588323.692.43789.m6@yahoogroups.com> <52715F06-6BA3-4C16-B909-5E7E10986125@gmail.com> <008f01cf107d$42252240$c66f66c0$@net> <CADTNCUnYaBZSqXVVkPiKcJf4ZtzK-nwh2=+yQf7P9KKhTOZ9Ew@mail.gmail.com> <005c01cf10a2$6d7c6910$48753b30$@net>
Reply-to: CBQ@yahoogroups.com
Sender: CBQ@yahoogroups.com


Charlie -
I model Q and D&RGW diesels in HO, and I am modeling D&RGW #556 with Stewart F3 phase IV shells.   It was delivered to D&RGW on 11/22/48 as an "F5" with all the features of an early F7 except the rectangular F3 dynamic brake resistor grids.   The units were refitted as phase I F7s in 1949, when the F7 features were in full production.   The 36" dynamic brake fans were installed at that time with the increase from 540 amps to 600 amps for the F7.
- John Manion
  RGMHS Exhibit Coordinator


On Mon, Jan 13, 2014 at 2:00 PM, Charlie Vlk <cvlk@comcast.net> wrote:
 

John-

You are correct about we Model Railroaders developing the concept of “Phase”.   Many real railroaders didn’t even pay attention to the manufacturer’s model designation…. a 1500 HP EMD was just a locomotive that they ran.  

Even the published “Phases” can be tricky.   In researching a model project I discovered there is another F unit phase, which is actually quite common, that the original X2200 South scheme did not include…..F7 phase 1b.

The Q did recognize “F5” Phase which some modelers do not recognize because EMD lumped them in with F3s.

This is different than using the wrong terms…..we had to invent the system to track things the railroads did not really care about.

Charlie Vlk

 

From: CBQ@yahoogroups.com [mailto:CBQ@yahoogroups.com] On Behalf Of John Manion
Sent: Monday, January 13, 2014 1:40 PM
To: CBQ
Subject: Re: [CBQ] Proper Terminology

 

 

Charlie -

Keep in mind that one term we modelers use and was invented for diesel modelers is "phase."   Diesels or motors have been identified by model number, builder number, and date built.   We modelers refer to diesel models by phase, based on noticeable external features.   For example, the F3s are identified by at least four phases.   The Q CZ motors in the 9960 series are phase II, with "chicken wire" over the vents between the portholes.   The Q F3s in the 160 series are phase IV, with stainless steel intake grills and horizontal louvers between the two portholes on each side panel.   If you are buying or building a diesel model, you have to identify the phase from a prototype photo.   A roster will not give you the details you need for an accurate model.

- John Manion

  Denver, CO

 

On Mon, Jan 13, 2014 at 9:33 AM, Charlie Vlk <cvlk@comcast.net> wrote:

 

While Railfanning and Model Railroading is a Hobby, Railroad History is available (and the (accurate) preservation of it is one of the goals of the BRHS (not that this is that list).

 

Bill and others are correct to point out that terminology did vary between railroads and even different parts of the same line.

 

That does not, however, give carte blanche to invent terms or propagate known incorrect ones.   Over on the Passenger Car List an individual insists on calling diaphragms “pongers” and a number of people have picked up on that inexplicable made-up moniker.   Likewise some Model Railroaders like to call a 2-8-0 a “Connie”…… a term I have yet to run into in any prototype railroad literature and only see as a reference to a series of three tailed prop airliners made by Lockheed (and a Greek restaurant in Berwyn at Harlem Avenue and the CB&Q that was a favorite after-IITMR club late night hangout).

 

The apparent or possible confusion brought about by calling a Fairmont or some such MOW machine a “motor car” when the same term was applied to a Gas-Electric is something that needs to be further researched.   On the CB&Q early on distillate, gas, and diesel locomotives were referred to as “motors” so there probably is no confusion there.

 

Charlie Vlk

 




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>