Re: [CBQ] Lettering for 250 Ton Steam Cranes

["scott myers" <myers.scottv@gmail.com>]

Does anyone have high quality photos (particularly of the lettering) that can be emailed to John?

Thanks,

Scott Myers

On Tue, Jun 13, 2023 at 2:05 PM John Hagen via groups.io <sprinthag=yahoo.com@groups.io> wrote:

Have been conversing with Scott about these decals.

As I have told him, if I can get photos or proper drawings of the lettering, I will produce the decals.

Not knowing how much space one set will require a cannot set an exact price right now, That said, assuming we are speaking HO (once I have the artwork finished, I can do them in pretty any scale) and that there will be white ink involved, I’d make an uniformed estimate of $6.00 - $7.00.

It really depends on the amount of space and ink will be used.

The attachment is of the artwork for SOO crane #W2 in O scale. It uses a full decal sheet (8.5 X 5.5 or half a letter size sheet). The ink is mainly red but there is a lot of open space. If I could have reduced the size of the set to where 2 sets would work on one sheet, the price would have been appreciably less.

I charged $12.00 per set. If it would of used more white ink it would have been $15.00. In HO it would be the same as my estimate, or less depending on how small I can make it.

If we go ahead with this, no money will change hands until I have proof that has been okayed by you. At that point, I send you an invoice and print when I receive payment. I accept PayPal, US POSTAL Money Order’s and personal chocks. With PayPal and USPS MO’s, I print when payment has arrived. For checks there is a waiting period.

That’s it. No set up fees, no minimum number of sets and, usually no artwork charge for prototypical sets unless they are very complicated and involved. No payment in advance waiting for the product to designed and approved.

 

John Hagen

OBS-CALS

Your Source for OBScure deCALS

21050 George Hunt Cir. Apt 821

Waukesha, WI 53186

sprinthag@yahoo.com

(262) 385-4450  Mon-Sat 9am-9pm Central

 

 

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of scott myers
Sent: Monday, June 12, 2023 3:36 PM
To: CBQ@groups.io
Subject: Re: [CBQ] Lettering for 250 Ton Steam Cranes

 

Excellent idea for a BRHS project.  I have to think that a number of us would be interested in decals for this and perhaps other CB&Q cranes.

 

Scott Myers

 

On Mon, Jun 12, 2023 at 2:46 PM Bryan Howell via groups.io <tubaman21=yahoo.com@groups.io> wrote:

It would still be worth it to reach out to him. You could get probably 8-10 sets on one sheet and then sell the rest. I know I would buy one. 

 

Alternatively, perhaps this could be a decal project for the BRHS. I think there would have to be something else in the set to make it a little more worthwhile, but if the Society is interested in going that route, I could offer my assistance on the project once again.

 

Bryan J. Howell

Superior, WI 

 

 

On Monday, June 12, 2023 at 02:16:00 PM CDT, scott myers <myers.scottv@gmail.com> wrote:

 

 

I checked out their website, and it is a minimum of $88 for one sheet of custom made decals. Given that the list price for the upcoming Athearn crane and boom car is $95, the custom decals do not appear to be a cost effective solution.

I still am left wondering how others that have modeled this crane (with several models pictured on-line or in the Zephyr) have lettered their models.

 

Scott Myers

 

On Sun, Jun 11, 2023 at 1:58 PM scott myers via groups.io <myers.scottv=gmail.com@groups.io> wrote:

Thanks for the suggestion, Tom.

 

Scott Myers

 

On Sun, Jun 11, 2023 at 10:29 AM Tom Whitt <twhitt86@comcast.net> wrote:

Reach out to Circus City Decals in Baraboo, WI.  I'm sure he could produce what you are looking for, and then make them available for others to purchase.

_._,_._,_

---

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#65458) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_