Ray
So the E-8 is going into CUS not coming out
Steve
________________________________
From: Ray bedard <tczephyr@hotmail.com>
To: "CBQ@yahoogroups.com" <cbq@yahoogroups.com>
Sent: Sat, March 27, 2010 6:13:12 PM
Subject: RE: [CBQ] E5 and E7 Paint
John, I did an E8 using the following:
Model Master GLOSS black (#1147) as a base coat - I beleive that the black is
used to act as reflective base for the chrome. Let this dry completely (I'm
from the school that you wait 24 hours before touching the model and adding any
additional paints, decals etc.)
Then use ALCALD II CHROME (#ALC107) to spray over the black. Note the the
Alclad instructions recommend Alclad gloss black, but I heard from others that
Model Masters is better.
DO not use the water base paints, at least that is what I was told.
Now one thing that you have to keep in mind is to NOT paint over the chrome
once it has been painted on the model.
As a rule, for me that is, when painting a model, I always give it a coat of
gloss before I decal the model. Then when the decals are set, I always give the
model an overcoat of dull to hide the decal film. This has been the practice
for most professional painters.
However, I made a big mistake on the E8, after decaling it, I thought I would
run a coat of dull coat over it to hide the decal film once the decals had set.
BIG MISTAKE. So when your done decaling the model, keep that in mind.
I would be interested in knowing how your E5 project comes out and how you
kitbashed it. I know many others would also be verying interested in it as
well. Perhaps you can do an article for the Zephyr, take lots of photos.
Good luck.
Ray Bedard
San Jose CA
> To: CBQ@yahoogroups.com
> From: railbass@comcast.net
> Date: Sat, 27 Mar 2010 12:33:54 -0600
> Subject: [CBQ] E5 and E7 Paint
>
> I am kitbashing, detailing, and painting Proto 2000 E6s to E5s and Proto
> 2000 E7s to Q E7s. On both of these models, I intend to have the stainless
> steel sides as built for the E5s and retrofitted for the E7s. What paint
> would be best to represent stainless steel on these models?
> - John Manion
> Denver, CO
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850552/direct/01/
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
CBQ-digest@yahoogroups.com
CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|