Duncan,
Rob has an excellent suggestion. But there is another potential
solution for the problem. A while back American Model Builders
introduced some "dividers" into their Laser Kit series of parts. These
dividers are specifically manufactured to reinforce or ever so slightly
pull the sides of the Branchline heavyweight cars together depending on
which part you choose to use. Their part 152-385 is a section divider,
while their parts 152-377 or 152-378 are used to bring the sides of the
car ever so slightly tighter to get a good snap fit for the roof. If
you check the Walthers catalog on-line you will find these parts and be
able to make a determination if they are right for you to use.
Good Luck, Dave S.
--- In CBQ@yahoogroups.com, "Duncan Cameron" <d.cameron@...> wrote:
>
> Has anyone had any difficulty in getting the roof on the Branchline
coach to snap into place? It refuses to snap down at the ends. Is
there a problem with the vestibule wall and washroom partions, or am I
alone?
> Duncan Cameron
>
> [Non-text portions of this message have been removed]
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:CBQ-digest@yahoogroups.com
mailto:CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|