Hello' The grabs up the side of the nose are 17" and you can use either of
these. Walther's numbers are 229-2202 or116-29100 and the ladder grabs at the
top edge of the nose are 229-2215. You might check out Cal-Scales part numbers
190-506, 190-507,190-508,190-509,190-515,190-502, 190-503,190-504,190-505. The
BEST looking scale lift rings are Sunrise etched brass and two sizes are
available along with several Q headlights. John Trulson
----- Original Message -----
From: rgortowski@aol.com<mailto:rgortowski@aol.com>
To: CBQ@yahoogroups.com<mailto:CBQ@yahoogroups.com>
Sent: Wednesday, October 03, 2007 11:42 AM
Subject: [CBQ] E Unit Nose Grabs
Can anyone help me with the Q's nose grabs on the E units? Is there a
commercial part you can buy? Can anyone tell me the width? It appears to be
17" or
so. The 22" commercial grabs look too big to me.
Thanks,
Rich Gortowski
************************************** See what's new at
http://www.aol.com<http://www.aol.com/>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:CBQ-digest@yahoogroups.com
mailto:CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|