I want to do some diesel detailing. I checked BB #10 on the E's and
couldn't find any answer to these questions. Hope perhaps someone can
help:
1. Does anyone know the spacing on the nose grab irons on the E-units?
2. DOes anyone know the width of the grab irons used on the nose (15",
16", etc.)?
3. There is an angled metal "walkway" along the frame sill between the
fireman's side door and the nose grab irons. Does anyone know the
dimensions on this, primarily the width of the angle "ledge" you would
walk on?
4. Does anyone make an E-unit detailing kit in HO that might have the
under window long grab? I know Cal-Scale makes a detail kit but I
don't know what is in it or how good the parts are. I have ordered a
couple of the Walthers f-Unit detailing kits which have the over
windshield grabs.
Finally, if anyone has done a similar detail project, I would be
interested in hearing how you did it.
Tom Mack
Cincinnati, OH
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:CBQ-digest@yahoogroups.com
mailto:CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|