Duncan,
I use about one third to one fourth glue to water and add a couple of
drops of detergent to help the flow of the glue. lightly spray with soapy
water first for best results. Hope this helps.
Patrick Homan
----- Original Message -----
From: "Duncan Cameron" <d.cameron@sympatico.ca>
To: "BRHSlist" <CBQ@yahoogroups.com>
Sent: Saturday, October 14, 2006 5:55 PM
Subject: [CBQ] modelling question
> Group,
> I'm finishing off my model of the TP&W office in Keokuk by putting gravel
> on the flat roof portions. I'd planned on applying it the same way as one
> would glue down ballast -- a bit of water with dish soap to "wet" the
> gravel and then diluted white glue to hold it. Does anyone have a
> dilution ratio for the glue to suggest before I start this?
> Duncan
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/CBQ/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:CBQ-digest@yahoogroups.com
mailto:CBQ-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|