Re: [CBQ] Jim's Junction

["Rick Keil" <rkeil6721@hotmail.com>]

John,

I bought a pair of these a couple of years ago. Other than the conversion parts already mentioned, nothing in plastic. 

I am looking to see if I can get a company that specializes in 3D printed rolling stock to do them.

https://americanscalemodels.com/HO/HO_Detail_Parts/Trucks?product_id=1855

Ricky Keil

St Louis, MO

Get Outlook for iOS

---

From: CBQ@groups.io <CBQ@groups.io> on behalf of BRIAN PAUL EHNI <bpehni@gmail.com>
Sent: Thursday, September 9, 2021 3:47:16 PM
To: CBQ groups.io <CBQ@groups.io>
Subject: Re: [CBQ] Jim's Junction

 

IIRC Twin Star Cars USED to make resin parts to approximate one.

 
Thanks!
--

Brian Ehni
 

On 9/9/21, 3:33 PM, "John Olson" <CBQ@groups.io on behalf of trains28@jimsjunction.com> wrote:

    Group,
   
        Is there an HO company out there that makes the Symington-Gould /
    Chrysler designed high speed freight car truck? This truck had a unique
    'snubber' or shock absorber attached to the bolster & side frame to
    reduce shock. The 'Q' used this truck on 40' & 50' box cars that were
    used in express service as well as the Dark Green GAEX 50' DF box cars.
    Page 50 in the CB&Q Color Guide to Freight and Passenger Equipment has
    photos of a 50' DF box car and 50' ex-GAEX box car using this truck. Thanks,
   
       John Olson
   
       Billings, Mt
   
    --
    John Olson- owner
   
    Jim's Junction
    811B 16th St. West
    Billings, Mt 59102
   
    406-259-5354
    <trains28@jimsjunction.com>
    See us on FACEBOOK @ Jim's Junction
    See us on GOOGLE @ Jim's Junction
   
   
   
   
   
   
   

_._,_._,_

---

   Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#62517) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_