BRHSLIST
[Top] [All Lists]

Re: [CBQ] GP30 fans

To: CBQ@groups.io
Subject: Re: [CBQ] GP30 fans
From: "James Sandrin" <sandmantrains@gmail.com>
Date: Mon, 15 Nov 2021 19:45:39 -0700
Delivered-to: unknown
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@groups.io
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/simple; d=groups.io; q=dns/txt; s=20140610; t=1637030755; bh=cmjFhR1C8Ns/nKZHTtOoaOM+y7E0vtBgZKC0huQO7FI=; h=Content-Type:Date:From:Reply-To:Subject:To; b=t7Esk4eEfbPmqqZZcg02wIJpw0uPdlXU2MjqnM0mm1Hvb2mPz81RPLCLEoqtRIiA//C xv7QleDTOset4sAJKTKdGNQRYqL1BDvWhafkN9oHYSGkaLSIfLwBNnnAZhVUQTGNU2FTp qZs2M4OyBnWQtrlbEEz8ifZ46LUhjLZwEjg=
In-reply-to: <592566110.57913.1637028222990@sbcglobal.net>
List-help: <mailto:CBQ+help@groups.io>
List-id: <CBQ.groups.io>
List-subscribe: <mailto:CBQ+subscribe@groups.io>
List-unsubscribe: <mailto:CBQ+unsubscribe@groups.io>
Mailing-list: list CBQ@groups.io; contact CBQ+owner@groups.io
References: <592566110.57913.1637028222990@sbcglobal.net>
Reply-to: CBQ@groups.io
Sender: CBQ@groups.io
Hello Chris: Here are some observations concerning GP30s as Q motors. The center fan over the radiators is about 4 inches taller than the 36 inch fans on  earlier Geeps or F-units. It is also identical to the middle radiator fan on the early GP35s.  As for replacement fans, Cannon made replacements but these have not been available for a while.  Plano makes etched grills and fan blades that can enhance the original housings.  I personally think that plastic handrails are the worst and almost any replacement stanchion with wire railings would be better.  Also, Athearn makes a good Leslie S-2 horn in brass and a vastly improved replacement Blomberg truck side frame

I assume you are aware of BRHS bulletin #52 focussing on the Q GP30s.  One error from said Bulletin, the second order of units, 970-977, had the rear sandfiller on the prow of the high hood, not below the right number board as on the P2K version. See enclosed photo for that detail. That should cover most mysteries the project could present up front!  Jim Sandrin

Virus-free. www.avg.com

On Mon, 15 Nov 2021 at 19:03, popbumper1 <popbumper1@sbcglobal.net> wrote:
Hello modelers! I have an original undec P2K GP30 which I plan on modeling/painting in CB&Q colors. Looking over the model last night, and comparing it to prototype units, I see a few changes needed to make it more accurate.
  However, the P2K fans are, in a word, "awful". So, a few questions if I may:

1) is the 36" center fan the same as would be used on, say, any other early Geep?

2) the 48" fans - is there a parts manufacturer who makes a fan that would be both a suitable and superior replacement? 

  Thanks for any guidance that can be offered. Not willing to accept the stock factory units as adequate. 

Chris 



Sent from my Verizon, Samsung Galaxy smartphone

_._,_._,_

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#62767) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_

Attachment: BN 2249 rear Lincoln, NB.jpg
Description: JPEG image

<Prev in Thread] Current Thread [Next in Thread>