Re: Fw: [CBQ] Information on 05 Baldwin Plates for 5600-5608 [1 Attachment]

["GEORGE CRAWFORD georgecrawfordsr@comcast.net [CBQ]" <CBQ@yahoogroups.com>]

[Attachment(s) from GEORGE CRAWFORD included below]

Thanks to Norm, Bob,andLou for the info.

Noel

On January 29, 2017 at 6:04 PM "LZadnichek@aol.com [CBQ]" <CBQ@yahoogroups.com> wrote:

 

 

January 29, 2017

 

Noel - I've got a number of right and left hand side views of 5601 from construction to scrapping. Only in the Baldwin Builder's Photograph does the round Baldwin Builder's Plate show on the left hand side. In all other later such views there is no builder's plate showing. The plate might've been removed early in the locomotive's service life during an overhaul or following some kind of incident. I'm inserting and attaching the Builder's Photograph:

 

 

The round builder's plate is located just about directly above the cylinder. As for 5608, it was the first of 13 additional 4-8-4's that the Q built themselves at the West Burlington Shops. Baldwin supplied the boilers. The earlier 5600 through 5607 were all constructed at the Baldwin Locomotive Works in Philadelphia, PA. Best Regards - Louis

 

Louis Zadnichek II

Fairhope, AL 

 

In a message dated 1/29/2017 3:35:35 P.M. Central Standard Time, CBQ@yahoogroups.com writes:

 

----- Forwarded Message -----
From: Bob Lehmuth <rhlehmuth@hotmail.com>
To: Norm Metcalf <normmetcalf@yahoo.com> ;; "georgecrawfordsr@comcast.net" <georgecrawfordsr@comcast.net>
Sent: Sunday, January 29, 2017 1:58 PM
Subject: Re: [CBQ] Information on 05 Baldwin Plates for 5600-5608

5600    61443    7/1930    16-50 1/4 E

5601    61444    7/1930 

5602    61496     9/1930

5603    61497    9/1930

5604    61498    9/1930

5605    61499    9/1930

5606    61522    10/1930

5607    61523    10/1930

5608 - Without digging out my CB&Q book, I find no CB&Q #5608 in my (complete) BLW records

Plates would have been standard 9 1/4" round BLW plates

Bob Lehmuth
St George, Utah

SEMPER  FI

 

---

From: Norm Metcalf <normmetcalf@yahoo.com>
Sent: Sunday, January 29, 2017 11:15 AM
To: Bob Lehmuth
Subject: Fw: [CBQ] Information on 05 Baldwin Plates for 5600-5608

 

 

----- Forwarded Message -----
From: "GEORGE CRAWFORD georgecrawfordsr@comcast.net [CBQ]" <CBQ@yahoogroups.com>
To: CBQ@yahoogroups.com
Sent: Sunday, January 29, 2017 11:30 AM
Subject: [CBQ] Information on 05 Baldwin Plates for 5600-5608

I am looking for the information contained on the Baldwin builders plates for 05 engine numbers 5600 thru 5608.

I would appreciate information on #5601 in particular. I am aware of the W. Burlington plate on pg 143 of Corbins book, but I need a Baldwin plate.

Thanks

Noel Crawford

 

 

 

 

>

__._,_.___

Attachment(s) from GEORGE CRAWFORD | View attachments on the web

1 of 1 Photo(s)

CBQ5601BaldwinLocomotiveWorksPhiladephiaPA1930.jpg

---

Posted by: GEORGE CRAWFORD <georgecrawfordsr@comcast.net>

---

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___