BRHSLIST
[Top] [All Lists]

Re: [CBQ] Re: Aurora Shops Vestibule Windows

To: CBQ@yahoogroups.com
Subject: Re: [CBQ] Re: Aurora Shops Vestibule Windows
From: rgortowski@aol.com
Date: Mon, 16 Jan 2012 13:51:51 -0500 (EST)
Delivered-to: unknown
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1326739926; bh=qhRGLjQlrv/MUGy9KZceaiogdtN1A1vefK2nSf31iMc=; h=Received:Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:References:To:In-Reply-To:X-MB-Message-Source:X-MB-Message-Type:X-Mailer:X-Received:Message-Id:x-aol-global-disposition:X-AOL-SCOLL-SCORE:X-AOL-SCOLL-URL_COUNT:x-aol-sid:X-Originating-IP:X-eGroups-Msg-Info:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type; b=Dk7ZUuC/pyZnQOXtDIzjAecnRp3VObsCcRRoBLM6Xqkt05o8sReXHoOV5MRXhkkvPyW5srQ/rMf+016EKJhgxnnKC87XAJHJo0sIxA/MjyHCp/mnhGJ/sHw9mkyKXqRO
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=FhUhBSclGn/rlrzTwTgUQrcn8XLalNA0j1rZdMOd679SZGFoMXaCWEnvA/tkOEiNl4EOFz14+LdTDHIc89rpSgatg2XW8E21uzLUPihZKEyo5Tm0F8kj1oPcQmqAkHcY;
In-reply-to: <jf1p9f+qhfn@eGroups.com>
List-id: <CBQ.yahoogroups.com>
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <jf1p9f+qhfn@eGroups.com>
Reply-to: CBQ@yahoogroups.com
Sender: CBQ@yahoogroups.com


Greg,
 
Last night, I was looking through the Micro Mark catalogue after I wrote the email and came upon the same thing.  I think you would need to slide the glass into the door area on a piece of styrene to push against with the vacuum part going through the window area.  I'm going to try it.  In any case, it looks like you will need to bust out the wire gates (which are really not necessary anyway.)
 
Thanks for the heads up.
 
Rich


-----Original Message-----
From: graywolfs2 <graywolfs02@hotmail.com>
To: CBQ <CBQ@yahoogroups.com>
Sent: Mon, Jan 16, 2012 12:12 pm
Subject: [CBQ] Re: Aurora Shops Vestibule Windows

 
Rich...

Go to the Micro Mark website

Look for "Model Pal Vacuum Pickup Tool"

http://www.micromark.com/model-pal-vacuum-pickup-tool,7851.html

I have one of these...it comes with a couple different size sucker tips.

Should work just fine for your dillema

Greg
Minnesota

--- In CBQ@yahoogroups.com, rgortowski@... wrote:
>
> Smarta**! That did bring on a chuckle...
>
>
>
> -----Original Message-----
> From: STEVEN HOLDING <sholding@...>
> To: CBQ <CBQ@yahoogroups.com>
> Sent: Sun, Jan 15, 2012 9:41 pm
> Subject: Re: [CBQ] Aurora Shops Vestibule Windows
>
>
>
>
>
> Rich
> Change to O Scale
> Steve in SC
>
>
>
>
>
> From: "rgortowski@..." <rgortowski@...>
> To: CBQ@yahoogroups.com
> Sent: Sun, January 15, 2012 9:40:46 PM
> Subject: [CBQ] Aurora Shops Vestibule Windows
>
>
>
> List,
>
> I've just spent several hours (without avail) trying to get the clear styrene "glass" into the vestibule windows of an Aurora Shops Coach. I had to break out the "gate" to even have a fighting chance, but even with angled tweezers, I can't get the glass to sit down right and stay in place. This is the first brass car I can't get the glass in. Anyone have any tricks for this?
>
> Rich G.
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>