[CBQ] Question on Airbrush Dilutions for Micro Scale Products

["Nelson Moyer" <ku0a@mchsi.com>]

I'm finishing a couple of resin cars, and I have Micro Scale's Micro Gloss,
Micro Satin, and Micro Flat. Micro Scale does not offer any help on thinning
these products for air brush application. I called then, and they said it
was determined by trial and error (I suspect mostly error with advise like
that!). Micro Scale's FAQ says they all water based and should be thinned
with water or isopropyl alcohol. I tried Micro Gloss and isopropyl alcohol
at 50:50, and the airbrush threw globs on the model at 20 psi, but smoothed
out at 30 psi. I would appreciate some input from modelers who have used
these products.

Nelson



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/CBQ/join
    (Yahoo! ID required)

<*> To change settings via email:
    CBQ-digest@yahoogroups.com 
    CBQ-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/