Hello,
I had the Digitrax TF-2 installed in mine which provided the capability of
controlling the Marker Lights on one function and the interior lights on the
second function. The decoder fit perfectly in the interior bathroom (I think
that is what it was). If I remember correctly, the contacts up on top of the
light bar had been isolated/insulated and soldered onto and than the bulbs
attached to the lighting function leads. I will have my friend who did the
actual install verify this and I will do a followup posting.
Tom Johnson
-------------- Original message --------------
> Date: Tue, 23 Nov 2004 21:26:30 -0600
> From: "Bob & Marian Sorensen"
> Subject: Burlington Business Car
>
> I have purchased the beautiful car and the lighting kit from Kato. The
> instructions for the lighting kit say that if control of the interior lights
> is
> desired on a DCC system, a decoder is needed. Has anyone out there installed
> a
> decoder to do this? If so, will they please tell me what they did?
> It looks like I could solder wires to the contact studs coming up from the
> trucks but I am not sure of what that material is and what might happen if I
> try
> to solder. It would be nice to have control of both the marker/rear light and
> the interior lights.
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/8ZCslB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|