BRHSLIST
[Top] [All Lists]

Re: [CBQ] Signal Bridges at Burlington

To: "CBQ@groups.io" <CBQ@groups.io>
Subject: Re: [CBQ] Signal Bridges at Burlington
From: "Nelson Moyer" <npmoyer@hotmail.com>
Date: Mon, 4 Dec 2023 00:27:50 +0000
Accept-language: en-US
Arc-authentication-results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none
Arc-message-signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=9LegHGgnH7mAwBRsBdfputpZcWkEvvN27T2BApeETHY=; b=JRcx21LaJSmm+GCs5V8eDY/ocO2JBJ+/7QSrjSjfM7dlGO8Un1TkfQ1BpvJhdOATx/VNmx/bdCpEc2GkA+FJLe3G1MZy1a0aI9rfOuTP4xXr05AGmeYSSyBzCkAVWviiaRUTtrdRkVHOdyhCQiDei+qHvh6FyXurHnGZVgo2G8ZEytRNdszchgfUjnP3NWPpEeuB2FdqJddqcLi5J4lu03zQrtpqOEbn3B/iclhsWlhX4ufyoemOj5C9Bnt1GixZlF77wn+W2sdDy6lbkSJhmjvOw1X/gxOOyze+CkbzqezFamNlzjOWcDFXiZMmbu+KkWX/vQrj++SvuLX94q5pyg==
Arc-seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=WVGavc6K3lTQZNrYmUuNo8Y8pXDy1eVKvCzUc9oPUWTpKu3b5fcw4uo7+ULaYOlJ/hGjRwiHOOr9euI8iAlf1ECOBtqhwPti7GrUgLpuQfa/0eLihb7Px6fKPxg7F8FNKbF51X1UhPe01ITui65CPxV50qf9xDNKomdhHxm/TOcgeTB9RfRSLwuetbHBKvjOc7JlplZXQDzCVbPTOb2H0vn5iY0QEdubl+8QdVEE2/VqO0KtpLmj3+1AnLEcXcbO1J2b2LnhP2BKvYkVETQNF0N4wLo4ExJ3HpZZfngOtJaZHrEPQTgH1DiajJDuMfVnGGCVkCuuBGg46WhoUZt0NA==
Authentication-results: mx.zohomail.com; dkim=pass; spf=pass (zohomail.com: domain of groups.io designates 66.175.222.12 as permitted sender) smtp.mailfrom=bounce+11863+66044+703214+1544929@groups.io; arc=fail (BodyHash is different from the expected one); dmarc=fail(p=none dis=none) header.from=hotmail.com
Delivered-to: unknown
Delivered-to: archives@nauer.org
Dkim-signature: a=rsa-sha256; bh=QroCrC1Ev9qzNV4hs+AjbqeH4jS4rbstdCrUWe9zAqk=; c=relaxed/simple; d=groups.io; h=ARC-Seal:ARC-Message-Signature:ARC-Authentication-Results:From:To:Subject:Thread-Topic:Thread-Index:Date:Message-ID:References:In-Reply-To:Accept-Language:msip_labels:MIME-Version:Precedence:List-Subscribe:List-Help:Sender:List-Id:Mailing-List:Delivered-To:Reply-To:List-Unsubscribe-Post:List-Unsubscribe:Content-Language:Content-Type; s=20140610; t=1701649675; v=1; b=CaZ5BPqaaF2Ps3CNxuZ3ptaQDAZ7+cddjysLYh0jACHFauAzZtdi8bG65EOj+enTNDzQI2jp C8LwadZveillROCNh131THpPWVRYyEIVrrkSqPAwbCsXVBmxlX5qvMxVYfIavvU4ll/pBqR7YQo BvR+A54UY6ExMjdVnk8d8BuY=
In-reply-to: <MW3PR13MB40905E9BFFC535C6B6E707F0BB87A@MW3PR13MB4090.namprd13.prod.outlook.com>
List-help: <mailto:CBQ+help@groups.io>
List-id: <CBQ.groups.io>
List-subscribe: <mailto:CBQ+subscribe@groups.io>
List-unsubscribe: <https://groups.io/g/CBQ/leave/1544929/703214/691670059/plugh>
List-unsubscribe-post: List-Unsubscribe=One-Click
Mailing-list: list CBQ@groups.io; contact CBQ+owner@groups.io
Msip_labels:
References: <257501da246f$ba1f6380$2e5e2a80$@bellsouth.net> <14396.1701477571961991267@groups.io> <27bb01da2535$b7e08510$27a18f30$@bellsouth.net> <630492244.2378443.1701536211573@mail.yahoo.com> <29c201da2554$139148e0$3ab3daa0$@bellsouth.net> <737626122.2367803.1701545113545@mail.yahoo.com> <PH0PR05MB99182C19D147CBFDFBFEFCB2BD80A@PH0PR05MB9918.namprd05.prod.outlook.com> <2a5701da255c$67fc2e10$37f48a30$@bellsouth.net> <MW3PR13MB40903DE0EE77C0CDAF362AC3BB87A@MW3PR13MB4090.namprd13.prod.outlook.com> <PH0PR05MB991845D9AAF6E1D944D5CB40BD87A@PH0PR05MB9918.namprd05.prod.outlook.com> <MW3PR13MB40905E9BFFC535C6B6E707F0BB87A@MW3PR13MB4090.namprd13.prod.outlook.com>
Reply-to: CBQ@groups.io
Sender: CBQ@groups.io
Thread-index: AQHaJYhRLYxGxWtTpU25X+tiVoSNiLCW3D6wgAElXICAAEQMEA==
Thread-topic: [CBQ] Signal Bridges at Burlington

Yes, I will need to dot the cantilever but not the bridge or the targets on the West end as I don’t model the main that far for lack of floor space.

 

Nelson Moyer

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of zephyr98072
Sent: Sunday, December 3, 2023 2:22 PM
To: CBQ@groups.io
Subject: Re: [CBQ] Signal Bridges at Burlington

 

Nelson:

 

If you are strictly being prototypical, you will need to include the cantilever at MP 204.99.  This was installed in 1950 under AFE 45832.  That AFE was for the CTC between Connett and Carthage Jct. (in service in 1951), including all four 2 track bridges in Illinois, and they evidently decided to include the cantilever in Iowa as part of the AFE.

 

Glen Haug


From: CBQ@groups.io <CBQ@groups.io> on behalf of Nelson Moyer <npmoyer@hotmail.com>
Sent: Saturday, December 2, 2023 6:54 PM
To: CBQ@groups.io <CBQ@groups.io>
Subject: Re: [CBQ] Signal Bridges at Burlington

 

Since I model 1953, it looks like I won’t have to build bridges.

 

Nelson Moyer

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of zephyr98072
Sent: Saturday, December 2, 2023 7:30 PM
To: CBQ@groups.io
Subject: Re: [CBQ] Signal Bridges at Burlington

 

Nelson, and Others:

 

Attached is a PDF schematic of the cantilever signal at MP 204.99, plus a 3 track bridge of the same design as the 2 track bridge at MP 206.8.  Although schematic in nature, they should help in modeling signal bridges that are close in scale and detail.

 

I never found a detail of the truss diagonals attached to the horizontal beam of the cantilever at MP 204.99.  I don't know the reason why they were added, but they are clearly depicted in all photos I have seen.

 

I think the 2 track bridge at the west end of the Burlington CTC is a post-merger installation, but I can't prove it.  It does not show up in any of the CB&Q signal bridge drawings or valuation sheets, and it also does not show on any of the alignment charts from 1957 to 1970 (they all show ground-mount signals).  Looking at the photo provided by Dave Lotz, it appears that the bridge has been spliced in the second panel from the right, and the design is virtually identical to the 3 track bridge in the attached schematic.  That schematic is of Bridge 15.02 at Gibson, Nebraska, a 3 track bridge that was taken down shortly after the BN merger.  My guess is that the bridge at Burlington is the same bridge after being shortened to 2 tracks.  BUT again, I can't prove it.

 

Glen Haug


From: CBQ@groups.io <CBQ@groups.io> on behalf of Dave Lotz <Dave_Lotz@bellsouth.net>
Sent: Saturday, December 2, 2023 12:16 PM
To: CBQ@groups.io <CBQ@groups.io>
Subject: Re: [CBQ] Signal Question

 

Nelson,

 

Here is what was left of the signal bridge at the west end of the CTC through Burlington when they were installing the ATC signals.  Unfortunately the searchlight signal heads had already been removed.

 

The photo was taken by Norman Schafer.

 

Dave

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of Nelson Moyer
Sent: Saturday, December 2, 2023 2:41 PM
To: CBQ@groups.io
Subject: Re: [CBQ] Signal Question

 

The photo of the interlocking levers and CTC panels prompts me to ask how they interacted, e.g. what did the CTC panel control and what did the levers control? Also, what date was the photo taken? My guess is that the interlocking was for tracks West of MP 206.8 and the CTC panel was for Connett to MP 206.8.

 

Does anyone know of a photo of the signal bridge at the yard limit at MP 204.99?

 

Nelson Moyer

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of Louis Zadnichek via groups.io
Sent: Saturday, December 2, 2023 1:25 PM
To: CBQ@groups.io
Subject: Re: [CBQ] Signal Question

 

December 2, 2023

 

Dave - Thanks for the clarification! - Louis

 

Louis Zadnichek II

Fairhope, AL


In a message dated 12/2/2023 1:16:47 PM Central Standard Time, Dave_Lotz@bellsouth.net writes:

 

All,

 

Wood Tower was built in 1892, the telegraph equipment that was originally installed on the second floor of the Victorian depot was moved to the tower in 1931.  The 1958 CB&Q annual report tells that CTC was installed in 1958 along with 8 automatic grade crossing signals.  The alignment charts agree with the 1958 date.  Photographic evidence shows the CTC panel was initially installed in the tower, but the annual report also says that the CTC would allow for the removal of Wood Tower. A Burlington Hawk-Eye article confirms the tower was razed in the late 1950s.  Prior to the razing the CTC panel was relocated to the 2nd floor of the depot.  The CTC controlled operations from Connett, Illinois, (MP202.4) east of the Mississippi River, to MP206.8 immediately west of the Mt. Pleasant Street overpass.  Am interesting note on the alignment chart for the Mississippi River bridge shows the CTC was installed between signal bridge 204.33 east of the bridge to the signal bridge 204.99 at the Burlington yard limits as early as 1916!


Dave  

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of Louis Zadnichek via groups.io
Sent: Saturday, December 2, 2023 11:57 AM
To: CBQ@groups.io
Subject: Re: [CBQ] Signal Question

 

December 2, 2023

 

Lenny - Did this board date back to the CB&Q era or was it manufactured and installed during the BN era? - Louis

 

Louis Zadnichek II

Fairhope, AL


In a message dated 12/2/2023 9:39:27 AM Central Standard Time, Dave_Lotz@bellsouth.net writes:

 

Hi Lenny,

 

This is after they moved the board from the tower to the depot.  Phil’s daughter, Paula, was in my high school class of 73.

 

Dave

 

From: CBQ@groups.io <CBQ@groups.io> On Behalf Of Walter
Sent: Friday, December 1, 2023 7:40 PM
To: CBQ@groups.io
Subject: Re: [CBQ] Signal Question

 




Dave,

Thank you for the update. Above is when the machine was in service. Phil Woods is the operator. Several things have been blacked out such as the bridge locks and Ill. Jct.

Lenny

 

 

Image removed by sender.

Virus-free.www.avast.com

 

_._,_._,_

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#66044) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [archives@nauer.org]

_._,_._,_
<Prev in Thread] Current Thread [Next in Thread>