Re: [CBQ] Decaling Shorham KCZ

["Rob & Bev Manley" <robev1630@sbcglobal.net>]

Rory,
I have been using Future for almost 20 years. I overcoated my Oriental Twin 
Cities Zephyr with it and it has held up to a lot of handling. About 18 years. 
At the time I think I used Microscale Semi-gloss finish for the final finish. 
All my current work gets a gloss finish of Future for the decals and is 
followed up with Pollyscale  Flat finish. I haven't had any cracking or 
discolorment issues. 
All the other modeler gloss coats seem to yellow the finishes. This is 
especially annoying on a set of FTs or F-units.

Sincerely,
Rob Manley


  ----- Original Message ----- 
  From: Murch 
  To: CBQ@yahoogroups.com 
  Sent: Monday, January 25, 2010 3:15 PM
  Subject: [CBQ] Decaling Shorham KCZ


    
  Group:

  I am finally getting around to finishing my Shoreham Shops KCZ thats been in 
the closet for 15 years!

  Does anyone have any advice/comments on preping the cars for decals? I've 
heard acrylic floor finish actually works better than the comercial gloss - 
comments?

  Thanks group for any advice.

  Rory Murchison



  

[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/CBQ/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/CBQ/join
    (Yahoo! ID required)

<*> To change settings via email:
    CBQ-digest@yahoogroups.com 
    CBQ-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/