Hi Steve,
Thanks for the information. Does Mullet River have a website? Are
their models kits or pre-built? Are they available in both 2-rail &
3-rail?
None of the major O-gauge manufacturers have offered a CB&Q wood-
sided caboose (er, waycar) to my knowledge. Hopefully someday.
Thanks,
Bill
--- In CBQ@yahoogroups.com, <sholding@...> wrote:
>
> I talked with Glen from Mullet River and the Chicago March Meet
and the next caboose will be the Q 3 window Waycar laser cut no date
> In O of course
> sjh
> ----- Original Message -----
> From: clipperw@...
> To: CBQ@yahoogroups.com
> Sent: Saturday, March 25, 2006 3:02 PM
> Subject: [CBQ] Re: Review of O-Scale 4-6-4 & 2-10-4 from 3RD
Rail/Sunset
>
>
> Bill,
>
> The only cars from Golden Gate on display were the Pennsy P70
and
> baggage car. Both looked nice. Sunset indicated that they were
> considering a full line of heavyweight cars in several road
names
> including Q. There was also some thought of building a Q way car
with
> the M-4 2-10-4. That would be welcome. I have their DM&IR
Yellowstone
> and caboose. Both are excellent. And, the Missabe M-4 really
runs
> smooth.
>
> Bill Barber
>
> On Saturday, March 25, 2006, at 01:32 PM, CBQ@yahoogroups.com
wrote:
>
> > Date: Sat, 25 Mar 2006 16:20:53 -0000
> > From: "cbq_bill" <cbq_bill@...>
> > Subject: Re: Review of O-Scale 4-6-4 & 2-10-4 from 3RD
Rail/Sunset
> >
> > Bill Barber,
> >
> > Thanks for the update. I'll compare the on-line photo of the
Hudson
> > model to some of the photos in the color books to see what you
are
> > refering to.
> >
> > Did 3RD Rail have their Golden Gate Depot heavyweight
passenger cars
> > or coal tower at the show? Any oher good news from the O-
scale show?
> >
> > At least for 3-rail O-gauge CB&Q steam, so far 3RD Rail is as
good
> > as it gets. The only other commercially produced 3-rail steam
are a
> > Weaver 0-6-0 from early 1990's (never seen one), Lionel Junior
> > Hudson #4000 (O-27, more toy than model, ~2000)in a freight
set,
> > Lionel 0-8-0 (nice and detailed, 2005), MTH-RK 0-8-0 (nice but
less
> > detailed, ~2001), and a Williams Hudson based on generic
tooling. I
> > really doubt that MTH, Lionel, Weaver, Williams, or Atlas-O
will
> > ever make specific, dedicated tooling for a CB&Q steam
locomotive.
> >
> > Thanks,
> >
> > Bill
>
>
>
> -------------------------------------------------------------------
-----------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "CBQ" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> CBQ-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
> -------------------------------------------------------------------
-----------
>
>
>
> [Non-text portions of this message have been removed]
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CBQ/
<*> To unsubscribe from this group, send an email to:
CBQ-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|