BRHSLIST
[Top] [All Lists]

Re: [CBQ] switchstands

To: <CBQ@yahoogroups.com>
Subject: Re: [CBQ] switchstands
From: "Russell Strodtz" <vlbg@earthlink.net>
Date: Thu, 13 May 2004 21:38:01 -0500
Delivered-to: archives@nauer.org
Delivered-to: mailing list CBQ@yahoogroups.com
List-unsubscribe: <mailto:CBQ-unsubscribe@yahoogroups.com>
Mailing-list: list CBQ@yahoogroups.com; contact CBQ-owner@yahoogroups.com
References: <1084455798.1573.55988.m12@yahoogroups.com> <006d01c438f2$b65855a0$6401a8c0@mchsi.com>
Reply-to: CBQ@yahoogroups.com
Steve,

This question has been mentioned in the past. I've posted the
CB&Q engineering drawings for switchstands here:

www.locorosters.com

Click on "Full Access".  The normal low switchstand was/is the
36D. Normal high switchstand is the Racor 112 or the CB&Q #4.
On some older yard and industrial trackage you might see the
Bethlehem 1222. It has a low profile and a kink in the handle
with much of the mechanism exposed.

The 36D would be the standard usage in yards. Mainline crossovers
would also get 36D's between the tracks unless there was some
reason that another placement worked out better. High stands
would be used on single switches outside yard limits.

No particular distinction was made between mainline, branchline,
or yards. A switchstand is a very long lasting piece of hardware.
Only changed when totally worn out or broken. After about 1990
there were many new designs installed to reduce injuries but that
situation does not involve the CB&Q.

Have no knowledge of any modeling information. 

Re: The diamond at Bushnell.  Diamonds are a very costly and
labor intensive pieces of trackwork. If there is doubt as to it's
usage it is best taken out. The labor expended in taking it in
or out is not very much compared to the cost of leaving it in.
The former CMStP&P diamond at Crawford WI was removed when it's
presence was no longer necessary and put back in when the State
found an Operator for that line. Just a good business practice.

Can also be a "in your face" tactic. When the SOO put in the CTC
through La Crosse they left both diamonds in even though it is
single track just East of there. Why? BN/BNSF has to maintain
them.

Russ

  ----- Original Message ----- 
  From: sdoyle19@idt.net 
  To: CBQ@yahoogroups.com 
  Sent: Thursday, 13 May, 2004 09:00
  Subject: [CBQ] switchstands



  I'm modeling Q mainline, yard and secondary lines and wondered what types of
  switchstands/lamps are appropriate (target, height, etc.), and who
  manufacturers
  HO models that are close to the proptotypes.
  Many thanks in advance.
  Steve




[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/8ZCslB/TM
---------------------------------------------------------------------~->

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/CBQ/

<*> To unsubscribe from this group, send an email to:
     CBQ-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


<Prev in Thread] Current Thread [Next in Thread>